JETech Carbon Fiber iPhone 6 Case Review

JETech Carbon Fiber iPhone 6 Case Review

Buy it at Amazon: JETech Carbon Fiber iPhone 6 Case [Affiliate Link]

Takeaway: Average protection against scratches, bumps and drops; comfortable in hand w/extra grip bar.

The JETech case is composed of two pieces: the outer plastic bumper case and an inner TPU rubber layer. The plastic bumper is thin and flexible but under enough stress or impact, could snap or shatter. The rubber button covers for the sleep and volume keys are part of the inner rubber layer and there's an airgap between the bumper and the inner layer that distributes and absorbs some shock from impacts. The interior of the rubber layer has a striped pattern for shock distribution and is soft and flexible as to not scratch the back of your phone. The iPhone 6 slips in smoothly and stays firmly in the case once installed. Around the screen is a raised edge that protects your phone's screen when placed on a table face down.

On the back is a carbon fiber texture with precise cutouts for the camera, sensor, flash, and Apple logo. Towards the bottom is a raised bar for additional grip for your fingers which is nice because the case actually feels somewhat slippery in the hand. The only issue i had with it is there was a small bump on the bar (from the molding process) which caused a raised area right in the middle. It's slight but still noticeable, though I was able to remove the bump with a razor blade. Along the bottom you have fitted cutouts for the Lightning port, headphone jack, speaker, and mic. Lastly, on the side you have access to the mute switch, but it's set pretty far back. The case itself is lightweight and moderately protective. It'll be able to absorb everyday bumps and hard contact but a drop from a few feet might shatter the bumper and direct hit to the phone's screen wouldn't be covered at all. However, the body of your phone will be shielded from most dents, scratches, and scrapes.

Buy it at Amazon: JETech Carbon Fiber iPhone 6 Case [Affiliate Link]

Comments

Post a Comment

Popular posts from this blog

Vava Egg Shaped Kids Baby Night Light Review

Image
Vava Egg Shaped Kids Baby Night Light Review Buy it at Amazon: Vava Egg Shaped Kids Baby Night Light [Affiliate Link] Takeaway: Cute nightlight, several modes, good range of brightness level/color temps, long run-time. You'll receive the light, a microUSB charging cable, a small metal carabiner, and an instruction manual. This light is cutely egg-shaped and is made of plastic with a solid white base and a translucent white top. On the front you have the Vava logo and a small indicator LED and on the back you have the charging port hidden behind a rubber door. The unit takes about 5 hours to fully charge and the LED blinks blue quickly while charging. Once fully charged can last for up to 80 hours or about 10 consecutive nights at 8 hours each. What's nice about this night light is that once it is charged, it is portable and can be placed in different rooms and doesn't need to be near an outlet. It's also IP65 water resistant rated and is able to get wet. On the bottom...
(read more)